| Transmission | |||
| Part# | Description | New | Used |
| BT1 | V-8 or 6 cyl trans (3 speed need tag number) | 460 (exchange) | 175-225 |
| BT2 | 4 lbs rebuilt kit (brgs, syncros and seals) | 139 | |
| BT4 | 135 lbs NP 435 low geared 4 speed (6.50-1 ratio) | 625 | 300-365 |
| BT5 | NP 435 rebuilt kit (with syncros) | 169 | |
| BT6 | Clutch kit diaphragm pressure plate (This kit is much better than stock. All new plate, brg and disc) | 159 | |
| BT7 | Flywheel (add $32 if resurfaced) | 75 | |
| BT7 | Flywheel ring gear | ||
| BC7a | Clutch fork dust boot | 15 | |
| BT8 | Bellhousing (spring fork or clip fork) | 42 | |
| BT9 | Release fork (spring or clip) | 30 | |
| BT12 | 12 lbs Floor shifter kit for 3 speed | 229 | 125 |
| BT12a | Floor shifter steel cover | 29 | |
| BT12c | C-4 auto dipstick and tube | 99 | |
| C-4 auto tranny kick down | 55 | ||
| Transmission Adapters | |||
| Part# | Description | New | Used |
| BT14 | V-8, 3 speed adapter housing | 65 | |
| BT14s | V-8 adapter housing oil seal | 26 | |
| BT16 | Stub shaft for 3 speed adapters | 42 | |
| BT17 | Stub shaft for C-4 adapter | 85 | |
| BT18 | C-4 adapter | 525 | |
| BT19 | Aod Ford overdrive automatic | 629 | |
| BT20 | 1966 1977 Ford Bronco new process 435 4 speed transmission
adapter .The np 435 transmission is a great trans to use . Has a 6.69-1 low
first gear ratio so it creeps over tough inclines .No driveline changes.
Resuse stock clutch setup . Only 40 lbs heavier than stock 3 speed setup.
Most commonly these trans found in 67-83 Ford f series trucks with a small
block and 28 spline output shaft. Adapter comes with gaskets , seal and
bolts.
|
289.99 | 45.00 dollars core refundable. Want old 3 speed adapter as a core. |
| BT21 | New Venture 4500 adapter and NV4500 transmission
kit includes 4500 transmission ,bolts, snap
rings, adapter to the transfer case, new tunnel cover, cross member,
shifter handle .stub shaft and bearing retainer ,clutch disc, adapter to
the bell housing .adapter housing bearing.
|
3200 | |
